Schedule Appointment | Locations | Contact Us |  
Midwest Tire & Auto Repair - Dyer, Indiana 219-322-2200 - Locally Owned and Operated
Click Here To Get A Tire Quote Now!

 

 
 


A tire’s sidewall is simply the outer and inner “walls” on the sides of a tire, if facing a tire on its side. Every sidewall has its own unique information that is divided into three main sections:

1. Tire Specs

This describes the fundamental characteristics of your tire. Size, construction, speed rating and more.

Tire Type: P
Tire Width: 225
Tire Aspect Ratio: 55%
Tire Construction: Radial
Wheel Diameter: 18
Load Index: 97
Speed Rating: T

 

2. Department of Transportation Safety Code

This assures that your tire complies with all Department of Transportation (DOT) safety standards. After the DOT insignia is your tire’s identification number, which begins with the tire’s manufacturer and plant code where the tire was manufactured (two numbers or letters). The ninth and tenth characters tell the week the tire was manufactured. The final number(s) signifies the year the tire was manufactured.

 DOT B9YR UJNX 5008 sidewall image.

 

3. UTQG Code

The Uniform Tire Quality Grading (UTQG) was established by the National Highway Traffic Safety Administration (NHTSA) to test tires following government prescribed test methods and then grade each tire on three main components:

Treadwear: This is the wear rate of the tire, comparable only to other tires within a tire manufacturer’s line. 100 is the baseline grade. Therefore a tire with 200 would theoretically last twice as long on the government’s course compared to a tire with 100.

Traction: Traction grades are AA, A, B and C (with AA being the highest grade). They represent the tire’s ability to stop straight on wet pavement as measure on a specified government track. Any tire rated under C is considered unacceptable for road travel.

Temperature: The temperature grades, from highest to lowest, are A, B and C. These represent the tire’s ability to dissipate heat under controlled indoor test conditions. Any tire rated below C is considered unacceptable.

 

4. Icons

Some tires have unique benefits, as showcased with specific icons. For example, the MICHELIN® Green X® Marking is a guarantee that the tire provides a level of energy efficiency among the highest in the market for its category without compromising traction and treadwear. The letters M and S (M +S) indicate that the tire meets the Rubber Manufacturers Association’s standards for a mud and snow tire. The letters can be found in the following combinations: M+S, M/S, and M&S. All-season tires carry this mark.


 
Home | Tires | Auto Care | Wheels | About Us | Locations | Tire Tips | Contact Us | Coupons | Special Promotions | Careers | Appointments

© 2015 Tire Experts, Inc. Terms Of Use | Employee Email Login